Production of S45C Steel Pneumatic Pistons, MS, Cylinder E235
DOI:
https://doi.org/10.63891/j-mart.v1i2.61Keywords:
Pneumatics, Production, Press, Pneumatic PistonAbstract
In the industrial world, production continues to grow rapidly, especially in the press industry. Press machines have 2 types of hydraulic and pneumatic. One of the commonly found press systems is the pneumatic system. Pneumatic is a system that gets compressed air sprayed on a certain object so that the object will move linearly. The piston has types including: single-acting cylinder system and double-acting cylinder system, many types of use, one of which is used as a press media. The purpose of this writing is to find out the production process of a pneumatic piston that uses 3 materials, namely Steel S45C, MS, Cylinder E235. This writing is based on field studies and literature studies conducted by the author. The production process of the pneumatic piston includes several processes namely; Drilling, Lathe, Assembly, and QC. In the drilling process, flanked 1 and 2 are given holes with diameters of 11 and 13, in the lathe process the parts on the tube and piston are turned to the adjusted size. In the assembly process all parts are combined into one component starting from the hydraulic tube, flanked, tube and piston. After completing the combination into 1, it will enter the last process, namely the quality control process, in this process it can be seen whether the pneumatic piston is feasible or not if the piston is not feasible then do the assembly process again but if the piston is deemed feasible then the piston can be used.
References
Budiyanto, A., Eko, S., & Yuono, L. D. (2021). Struktur kontribusi sektor industri terhadap PDB di negara maju. Jakarta: Kementerian Perindustrian.
Budiyanto, E., & Yuono, L. D. (2021). Proses Manufaktur. Eko Budiyanto.
Ferdian, A., & Denny, R. (2016). Introduction to Pneumatic Systems and Applications in Industry. Surabaya: Politeknik Negeri Surabaya.
Ferdian, D., 2016. Aplikasi Sliding Mode Controller Pada Sistem Pneumatic-Hydraulic Combination Control (Doctoral Dissertation, Institut Teknologi Sepuluh Nopember).
Tuapetel, J. V., & Narwalutama, R. (2022). Implementation of Pneumatic Systems in Repetitive Industrial Automation. Journal of Mechanical Engineering Innovation, 10(1), 14–21.
Tuapetel, J. V., & Narwalutama, R. (2022). Perencanaan Sistem Pneumatik Sebagai Penggerak Pada Pintu Gerbong Kereta. STRING (Satuan Tulisan Riset dan Inovasi Teknologi), 6(3), 244-253.
World Economic Forum (WEF). (2020). Readiness for the Future of Production Report. Geneva: World Economic Forum.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Eko Aprianto Nugroho, Abdul Rahman Agung Ramadhan

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.